In fact, the home door is also very care-maintained like a woman's face. If it is not maintained in the summer, it will be cracked open, deformed, and it will be wet and rot if it is not well maintained in winter. The same door also needs to be maintained according to weather changes. As far as wooden doors are concerned, in the summer, wooden doors are prone to "heatstroke" phenomena such as cracking, deformation and peeling of paint. It is reported that this is due to the uneven density of wood during the growth of natural wood. With the change of climate during use, and some inferior sealant can not effectively isolate the air into the channel of wood fiber, the wood will be in high humidity. The air absorbs moisture, causing changes in internal and external stresses that cause deformation and cracking. The expansion coefficient of wood products will be more obvious when the temperature is high, and consumers can prevent them from “heatstroke†by performing some simple maintenance on the wooden door. For example, use protective wax or special cleaning agent to evenly spread on the surface of the wooden door, then gently wipe to keep it shiny and moisture-proof. In hot weather, try not to use the cloth with water directly to clean it, at the corner of the house. Dehumidification kits, activated carbon and other dehumidification supplies are available. In addition, it is necessary to remove the humidity in the room in time, often using ventilation fans and ventilators to ventilate and ventilate. Indoor plants can be placed on the balcony or living room, not near the door, so as not to leak water during watering, causing the floor to be like a wooden floor. When foaming, the wooden door cannot be closed. Secondly, because summer is also a good time for decoration, high temperature and fast air circulation are favorable factors for decoration. Therefore, many consumers buy wooden doors at this time, and experts also remind consumers that the high temperature and high heat in summer is the test. A touchstone for wooden doors and their manufacturers.
We are a professional manufacturer of pneumatic Special Tools.
We have a series of special pneumatic tools.
such as Punch Gun , Nailer Puller , Deco Nailer , Carton Stapler ,Flex Point Nailer.
They are simple, quick and convenient.
Manufacturer of Special Tools Series, Special Auto Tools Series, Special Mechanical Tool Set Special Tools Series Special Tools Series,Special Auto Tools Series,Special Mechanical Tool Set,Special Trapezoid Crimping Tool DAHOO Tools Co., Ltd. , http://www.dahootools.com
