10W Mini Glue Gun Ptc Heating Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc. Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of
standards to ensure a robust and long life, we hope it provides you with many
years of trouble-free, safe and reliable service.
General Safety Information:
1. Check
if the plug cord was in good condition, and if there is stand before plug into
the electrical outlet ; Check if the used glue gun has glue flow through back
of the tunnel;
2. wait
5-10 minutes to allow glue to soften, stand up the glue gun on the table when
not in use;
3. Touch
nozzle to any clean, dry surface you wish to bond, to avoid any impurity stop
the nozzle;
4. If the glue could not flow from the nozzle when
the glue gun start to work, check if the glue gun are heating;
If glue
gun can not be heated, there are following reasons:
If glue
gun can be heated, there are following reasons: Nozzle has been stopped by any
impurity, ask careerman to manage it.
5. Do not use the glue gun
under moist climate, humidity will affect insulation and cause electric shock;
6. Do not touch the nozzle
or melted glue;
7. Do not remove out the melted glue stick from
the tunnel back side, it will damaged the glue gun as well as scalding person
hands.
8. Do not to disassemble or assemble any glue
gun accessories freely, it will cause glue gun do not work properly;
9. Keep out of reach of children and stocked it
beyond any of Children palpable side;
10. Only used for melting glue stick, no other
usage;
11. When in use, there are any glue flow back
from tunnel, stop using immediately, wait for careerman clean the glue;
12. Close the power if the glue gun not in use
after 15 minutes;
Important
Caution:
1．
Before use the glue gun, check
if the plug cord into electrical
outlet properly;
2． When glue gun
in first use, the heating element will have small smoke, it is normal
situation, but the smoke will disappeared after 10 minutes;
3． After power,
not for a long time in standby mode(not longer for 20 minutes), when the
suspension of use, unplug first.
4． Avoid to use
the glue gun under very hot or very cold environments.
5． Better not
work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in
continuous using, do not press the trigger with great pressure, and try to
squeeze out the un-melted glue, it would damage the glue gun
7． Not
applicable for bonding heavy objects or objects needed strong adhesive
8． The quality
of glue stick will directly influence the glue gun function and sticking
objects quality;
9． If the
power cord is damaged, do not replace it by yourself, must ask for
professionals to replace it.
10． This tools must b e placed in its position when
not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance
with flammable material.
12． Not applicable for a long time in the same
place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible
materials.
15． Do not leave equipment unattended when switched
on.
16． This appliance is not intended for use by
persons(including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
17. Children should be supervised to ensure that
they do not play with the appliance.
Using methods
1. Glue gun
using voltage is 110-220V AC,50/60Hz;
2. Tip gun
forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm
(mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks
through
4. After power,
wait for 5-10 minutes to allow glue to soften
Mini Glue Gun 10W Mini Glue Gun, Mini Glue Gun, Small Glue Gun, Electric Glue Gun Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com
According to market participants, the "fire line" for the steel market price rebound is for construction steel, especially for Shanghai. Due to the stimulation of a series of macro policies in the early stage, the steel market mentality has undergone subtle changes. At the same time, the secondary rebar in the Shanghai market has a low price of 3,600 yuan per ton. This price is basically at the level of “industry lossâ€. As a result, some market operators “received goodsâ€. At this time, the domestic capital market also showed signs of obvious start-up, which formed a “resonanceâ€. The whole steel spot market showed a round of rapid and obvious. Revenge rose.
According to analysis, the current price of wire rod and rebar has rebounded sharply. The price of tons in the week has risen from 150 yuan to 200 yuan, and the increase in individual markets has reached more than 300 yuan. End-users and small and medium-sized traders have a clear mentality of “buy up and not buy downâ€. The overall market volume has been significantly enlarged, but the gains have weakened near the weekend. It is estimated that the relevant ex-factory price of the steel mill will be followed up quickly, and it is still under the cost line at the current price point. If there is no significant bad news on the periphery, the construction steel price will be dominated by the consolidation trend.
The domestic hot coil market also experienced a retaliatory rebound early this week, but there are signs of a correction in the near weekend. Some merchants in the market found that when the price of hot rolls rushed to 4,000 yuan per ton, the market showed a shock consolidation. As for the later market, the market will continue to maintain a volatile pattern in the short term, but with the adjustment of various relevant market factors, the market may still have a higher potential. The cold rolling market also stopped falling and rebounded, and some of the leading market prices rebounded by more than 150 yuan per ton. Taking the Shanghai market as an example, the average thin plate sales volume of large households for three consecutive days exceeded 1,000 tons, and the individual sales amounted to 2,000 tons. As a result, the frequent occurrence of “intermittent sealing†has caused the price increase to increase continuously, and the market has gradually stabilized near the weekend. The rebound in prices has broken the habit of “purchasing on-demand†for some end-users in the price-dropping state, which is directly reflected in the increase in “bulk purchasesâ€.
According to relevant analysts, from the current situation, whether the change in the steel market is a technical rebound or a trend reversal is still difficult to determine. However, due to the excessive price increase and the lack of trend or fundamental changes in the market fundamentals and the external environment, businesses should be cautious and need to keep a clear head in the process of rapid promotion. After all, the high inventory of steel still exists; after the price rises, some of the repair and production reduction plans will be difficult to fully meet, the supply pressure is still relatively large; the business mentality may also gradually differentiate, in the case that the steel market uplink base is not completely consolidated, still face The pressure of the callback.
1
Plug cord into electrical outlet not
properly;
2
Glue gun has been destroyed owing to
inner cord short circuit;
tunnel at back of gun
The domestic steel market should remain awake in the recovery
According to the latest market report, in the recent week, due to the impact of the domestic capital market and the forward price of steel, the domestic spot steel market has seen a significant increase, and merchants have a strong desire to rise. However, as the transaction has not recovered significantly, the market wait-and-see attitude is still strong. Market participants reminded that in the rapid recovery of the market, we should keep a clear head. Notice on the role of the industry website and the promotion of industry information work