Wheel Bearing,Automobile Wheel Hub Bearing Assembly,Automobile Wheel Hub Bearing,Hub Bearing Assembly Shanghai Yi Kai Cheng bearing Co., LTD , https://www.ykchbearing.com
**Preparation Before Using the Sludge Filter:**
(1) Clean all debris from the filter press, filter plates, and filter cloth to ensure optimal performance.
(2) Inspect the entire sludge filter press and its components for any signs of damage or wear.
(3) Check the oil level in the hydraulic unit to ensure it is within the recommended range.
(4) Confirm that the filter plates are properly aligned and not displaced or misaligned.
(5) Make sure the filter cloth is tightly secured and free from tears or holes.
(6) Verify that the pneumatic diaphragm pump is functioning correctly and without leaks.
(7) Examine the filter plates for any deformation or warping that could affect filtration efficiency.
(8) Ensure that the air compressor and the three-point combination unit are operating smoothly and safely.
(9) Confirm that all necessary supplies—such as chemical solution, clean water, sludge, and compressed air—are available and flowing properly.
**Operation and Maintenance Guidelines:**
1. Before starting the vehicle, fill the pump with the liquid to be transported (if it's a suction-type pump), close the outlet gate valve, and connect the power supply.
2. Turn on the power and check if the pump rotates correctly and without unusual noises.
3. Run the unit for 5–10 minutes to ensure there are no abnormalities before putting it into full operation.
4. When stopping the system, first close the outlet gate valve, then turn off the power to prevent backflow or pressure issues.
5. If the machine will not be used for an extended period, clean the internal flow paths of the pump and disconnect the power supply to avoid corrosion or damage.
6. Regularly inspect the pump and motor, and replace any worn or damaged parts to maintain performance and safety.
7. Never run the pump dry, as this can cause serious damage and reduce its lifespan.
This guide is intended to help operators understand the proper setup, use, and maintenance of the sludge filter press. Following these steps ensures safe and efficient operation while extending the life of the equipment. Always refer to the manufacturer’s manual for detailed specifications and additional instructions. 
Filter press operation and maintenance
Service Phone: 13760177211 Wu Peng Website: