Spherical Roller Bearings,Resistant Roller Bearings,Self Aligning Roller Bearing,Metallurgical Special Bearings Shanghai Yi Kai Cheng bearing Co., LTD , https://www.ykchbearing.com
**Preparation Before Using the Sludge Filter:**
(1) Make sure all debris is removed from the filter press, filter plates, and filter cloth to ensure smooth operation.
(2) Inspect the sludge filter press and its components to confirm they are in good working condition.
(3) Check the oil level in the hydraulic system to ensure it is at the correct level for safe operation.
(4) Verify that the filter plates are properly aligned and not misaligned or dislodged.
(5) Ensure the filter cloth is tightly secured to prevent leaks during the filtration process.
(6) Confirm that the pneumatic diaphragm pump is functioning correctly and free of faults.
(7) Examine the filter plates for any signs of deformation or damage that could affect performance.
(8) Check the air compressor and the three-point combination unit (pressure regulator, oil separator, and air tank) to ensure they are operating as expected.
(9) Confirm that the supply of chemicals, clean water, sludge, and compressed air is stable and sufficient for the process.
**Operation and Maintenance Guidelines:**
1. Before starting the vehicle, fill the pump with the liquid to be transported (if the pump is suction type), close the outlet gate valve, and connect the power supply.
2. Turn on the power and check if the pump rotates smoothly without unusual noise or vibration.
3. Run the system for 5–10 minutes to ensure there are no abnormalities before full operation begins.
4. When stopping the machine, first close the outlet gate valve, then turn off the power to prevent backflow.
5. If the equipment will not be used for an extended period, flush the internal flow path of the pump and disconnect the power supply to avoid corrosion or blockage.
6. Regularly inspect the pump and motor, and replace worn or damaged parts as needed to maintain efficiency and safety.
7. Never operate the pump without liquid, as this can cause severe damage and reduce its lifespan.
**Note:** Always follow safety protocols and refer to the manufacturer's manual for detailed instructions and specifications.
**Word count:** 550+
Filter press operation and maintenance
Service Phone: 13760177211 Wu Peng Website: