Push button switch acknowledgment book / button switch specification / button switch technical parameters / button switch engineering drawings / button switch package


Type: Push Switch

(1) Rating Voltage and Current Specifications: 3A 125VAC / 1A 250VAC

(2) Electrical Performance: The electrical performance of the push switch is tested under various conditions to ensure its reliability and efficiency. Below are the test conditions and corresponding performance standards:
Contact Resistance Test Conditions: 1kHz ± 200Hz or DC, 5V, 1A; 1kHz ± 200Hz or DC, 30V, 0.1A Performance: ≤50mΩ or Max 50mΩ
Insulation Resistance Test Conditions: DC 500V for 1 minute ± 5 seconds Performance: ≥100MΩ or Min 100MΩ
Withstand Voltage Test Conditions: AC 500V (50-60Hz) for 1 minute Performance: No insulation breakdown


(3) Mechanical Characteristics: The mechanical properties of the push switch are designed to withstand repeated use and maintain performance over time. Key tests include:
Durability (Without Load) Test Conditions: 10,000 cycles at 15–18 cycles per minute without load Performance: Contact resistance ≤50mΩ, insulation resistance ≥100MΩ, withstand voltage: AC 500V for 1 minute without breakdown


(4) Environmental Endurance: The switch is tested for moisture and heat resistance to ensure it performs well in harsh environments.
Moisture & Heat Resistance Test Conditions: 40±2°C, 90%–95% RH for 48 hours, then 1 hour at room temperature Performance: Contact resistance ≤50mΩ, insulation resistance ≥100MΩ, withstand voltage: AC 500V for 1 minute without breakdown


(5) Soldering Requirements: - Temperature: 255 ± 5°C - Time: 3 ± 0.5 seconds - Effect: The terminal should be dipped into the solder bath up to 2mm deep, with more than 85% of the surface covered by solder. (6) Operating Temperature Range: -25°C to 85°C (7) Operating Force (GF): Specified force required to actuate the switch. (8) Product Construction: Details about the internal structure and dimensions are provided in additional drawings. Xiangjian Electronics Co., Ltd. China | XiangJian Electrics Co., Ltd. Acknowledgment Specification For Approval Button switch acknowledgment book / button switch specification book / button switch technical parameters / button switch engineering drawing / button switch package

Survey Prism

Survey Prism,Surveying Micro Prism For Optics,Surveying Ads Micro Prism Series,Surveying Micro Prism

Changzhou Precision Surveying & Mapping Instrument Co.,Ltd , https://www.surveyingfactory.com