The key to the long service life of high-quality locks lies in the method of use. The correct use of the locks ensures the longevity and longevity of the locks and the stability of the performance. How to use the locks properly? What details should I pay attention to when using locks in my daily life? How to use locks correctly: 1. Locking in the process of opening and closing the door on weekdays, it is best to hold the handle and screw the locking tongue into the lock body. After closing the door, let go of the hand, do not force the door, otherwise it will reduce the service life. Do not wipe the lock body and handle with a damp cloth, because some metal locks will rust; alloy locks will wear away the coating and lose the aesthetic effect. Over time, it will naturally cause damage to the lock cylinder and so on. Certain damage. 2. Always keep the lock body transmission parts with lubricant to keep the transmission smooth and prolong the service life. It is recommended to check once every six months or one year, and check whether the fastening screws are loose to ensure the fastening. 3. When the lock is in use, it should be applied regularly or when the key is not inserted smoothly. You can put a small amount of graphite powder or pencil powder into the lock cylinder to ensure the key is inserted and removed smoothly. However, do not add any other oils for lubrication to prevent the grease from sticking to the spring, causing the lock to not rotate and not open. 4. Check the matching clearance between the lock body and the lock plate. The fit between the lock tongue and the lock plate hole is appropriate. The matching clearance between the door and the door frame is 1.5mm-2.5mm. If changes are found, adjust the position of the hinge or lock plate on the door. 5, in the process of using the lock, it should be noted that the lock can not be rained, flushed, because there is a small spring inside the rust will not be flexible, naturally will damage the use of the entire lock. 6, in the process of using the lock, do not use the key to open the door directly, the key to open the door lock, the lock does not return to the original directly pull the key to open the door, the lock does not take long to protest with you to say goodbye. In short, as mentioned above, some daily methods of maintaining indoor door and window locks in daily life, as long as you find out with your heart, you will find that there are many ways to maintain the home locks, and the maintenance is also very simple, but it requires people to have good living habits. Concerned about surprises Label: How to use the lock product correctly? Previous: What is the working principle of the intelligent circuit breaker? Next: How to choose end mill to improve the efficiency of mold processing
The Xunda Bitumen Pipe Coating is a cold applied coating system designed for the corrosion protection water, oil gas underground or aboveground pipelines and waterproofing for the roof, tank , culverts etc.
l Easy to pply by hand.
l Excellent resistance to soil stress
l Excellent resistance to vapor transmission.
l Excellent resistance to cathodic disbondment.
l Good conformability and consistent uniform thickness.
l Waterproof for the basement, bridges ,roof etc.
l Meets ASTM D 1000 .EN 12068.AWWA C214
and other international standard.
Bitumen Pipe Coating Bitumen Tape,Pipe Coating ,Bitumen Coating Pipe ,Bitumen Paint Pipe Coating Jining xunda pipe coating materials co., ltd. , https://www.pipeanticorrosion.com