1. If it is a new equipment, this problem occurs at the beginning of use. It should be checked whether the screen and the discharge port of the vibrating screen are at the same level. If the screen and the discharge port are not horizontal, it will cause the vibrating screen. The problem of miscellaneous slowness appears, which belongs to the production quality of the vibrating screen. It should be contacted by the manufacturer and required to be repaired by the manufacturer; 2. Check whether the whole of the vibrating screen is working under the horizontal condition. If the whole equipment is not in the horizontal plane, the problem of slow discharge of the vibrating screen will occur, affecting the screening efficiency, and the damping ground of the vibrating screen can be added or subtracted. Foot to solve this problem; 3. If neither of the above problems exist, the angle of the eccentric block of the vibrating motor of the vibrating screen can be adjusted to change the speed of the material moving on the screen surface. The smaller the angle, the faster the material will spread outward; the angle The larger the material, the slower the material will spread out. The angle of the eccentric block of the vibration motor should be ≥5°. In addition, if the angle of the eccentric block of the vibration motor is too small, the accuracy of the screening will be affected, so the user should adjust it according to the condition of the material and the precision of the screening. Concerned about surprises Label: How to solve the problem of slow vibration of the vibrating screen Previous: Hydraulic system according to standard commissioning and maintenance and its next: Maintenance of manual spray gun
PP (Polypropylene) Biaxial Geogrid Composite With Nonwoven Geotextile: Ultimate tensile strengths from 10kN/m to 50kN/m . Flexurally stiff biaxial monolithic and integrally formed geogrid constructed of Polypropylene by a unique punching and drawing process comosite with needle punched geotextile is manufactured using short synthetic fabric by welding .
1. It reinforce old asphalt concrete road surface and asphalt layer, and prevents damage ;
2. It is used for rebuilding cement concrete road surface into composite road surface and restraining reflection caused by block contraction .
3. It is used in road expansion and improvment project and crack caused by old and new combination position and uneven sedimentation ;
4. It is used in soft soil base reinforcement treatment , is favorable for soft soil water separation and concretion,restrains sedimentation effectivly,distributes stress uniformly and improve overall strength of road base;
5. It is sued for preventing contraction crack caused by new road semi-rigid base layer,and reinforces and prevents road surface crack caused by foundation crack reflection.
*Related Products:extrued geogrid.
Composite PP Biaxial Geogrid With Nonwoven Geotextile Biaxial Geogrid With Nonwoven Geotextile, Extruded Plastic Geogrid Nonwoven Geotextile, Bx Geogrid Welded Nonwoven Geotextile Feicheng Lianyi Engineering Plastics Co., Ltd , https://www.lianyigeosynthetics.com