One point of view: to do anything to the budget. Living at home also requires a budget. Only in this way can you rationally allocate the fruits that you exchanged for the sweat in your hands. It takes more budget and it is difficult to do. You can't give it up because the budget is difficult to do, and you should overcome it. I believe we can work hard together to be successful! The composition of the cabinet: Design Knowledge Door price Lacquer paint Lacquer cement Heater decoration Living room Craft glass Drawer cupboard Doors Kitchen ceiling Glass door Doors Red brick Glass tiles Cupboard Doors Floor tiles Glass Sliding doors Glass Doors Doors Bedrooms Bedroom lamps
1. The goal is to keep the total budget within +-10% of the deviation.
Point two: It is not a good thing for the budget to do more than it really is. Your Mi Mi could have been used in a more useful place, but he has made a reserve fund for decoration, but unfortunately. This is what the budget means.
Point three: According to your actual needs (rather than the hands of Mi Mi) to do the budget, when the budget exceeds the scope of acceptance, then consider reducing the budget, help save.
2. Let's get started!
Consider what main material you need.
Usually you need the following main materials:
Bedroom, living room: floor, floor tiles, latex paint (or wallpaper), gates, swing doors, lights, heating, switches, sockets, bay windows.
Kitchen and toilet: cabinets, kitchen sinks, hoods and stoves, ceilings, sliding doors, steel doors, swing doors, lights, toilets, washbasins, faucets, showers, bathroom accessories, exhaust fans, wall tiles, heating, Switch, socket, floor drain.
It will be almost. There may be some other.
More diving, watching the diary. Take a look at how the DXs are selected. First determine from the material, and then determine the brand.
Many building materials markets, supermarkets.
Point 4: The budget must be made with full knowledge of its own needs and market, otherwise it cannot be accurate.
Choose what you like, and compare the tradeoffs repeatedly. Identify 2-3 alternatives for each material. These options must have a certain price difference, otherwise it does not make sense.
Point five: like almost, price is similar, quality is similar, word of mouth is almost the same but it is impossible to decide which one to choose, just choose one, because they are almost the same.
Do an EXCEL to record these things and calculate them based on the actual area. There are a lot of pretending to ask how to calculate the area, huh, huh, the size of the last time has been measured, the bottom * height = area.
So how do you calculate the actual consumption?
Too much TX asks how to calculate the consumption of latex paint. The simplest way to go to the latex paint website is to find it. Or look at the outer packaging of the paint, the top is clearly written, this is absolutely correct.
The number of other main materials can be counted up, and let's count. However, there are still many options, such as doors (to buy finished products, half products)? cupboard?
Door: The finished product is the most convenient. If you buy half a product to consider paint, hardware and so on. There is the door.
Cabinets: If you do not have customization, if you do not, you can refer to the appendix of this article, from other postings, the original is unknown, but extremely grateful to that DX, really powerful.
This time should be a little sense of accomplishment, slow, there are other woodworking. On this point, my experience is not much, because my family has no carpentry. However, the price of finished products may not be much different from that on the market. Individuals think that it is better to look for manufacturers to order.
Finally, the price of these things is added together.
3, no end is far from over.
Did not consider excipients and labor.
Excipients mainly include:
Wall: putty (or wall lining), cloth (to see if you want to pass the paste, usually only cracks on it), gypsum (filling holes), mesh cloth (can be used to make up for the original wall cracks, cat holes ), 108 glue (on the side of the putty before rolling on the wall, but also used to be mixed with gypsum powder, etc.), dumplings.
Tiles: cement, sand, groove joint agent. Cement sand is also used to build walls.
Bao Liguan: red brick. Or use a cement board.
Change electricity: wires, threading tubes, cassettes.
Change water: water pipes, valves.
Others: ceiling keel (anti-corrosion paint), waterproof coating, glass glue.
Artificial: Calculate it, but in any case we have to calculate by area and unit price. Because we already have unit area, we have a little initiative.
The number of accessories is difficult to estimate, such as cement sand. It is related to the ground and the wall.
Fortunately, the price of these accessories is not expensive, and finally about 30-50/m2 (sales area), my family is calculated to be more than 30 points. Now that you have a rough calculation, wait until the process is carefully studied.
If the above work is done strictly, the budget should be within +-10%. As long as there are no major changes, it should be safe to prepare.
My budget still made a mistake. I changed my brand of latex paint when I was near the renovation, and decided to change my heating temporarily after the renovation began. The two changes totaled around 4,000. My budget exceeded 5,500 in total. This represents 10% of the total budget. Thus, if these things are thought out in advance, the budget difference should not exceed 3%.
After completing the budget, I suggest that you can keep it and compare it with the actual amount, so that you can easily summarize your experience for your second home and for the new students.
Talk about the construction steps.
Appendix: Cabinet Material Details.
Cabinet (that is, the frame of the cabinet, generally TX is more concerned about his material)
The door (because it is something on the face, it is also what TX cares about)
Countertops (heavy weight of cabinets, unfortunately I don’t know much about it, I may have to write it with me)
Hinges (everyone is more concerned about)
Adjust the drawer guide rail door handle (dirty phenomenon more)
Baseboard (fudged prices make you startle)
Hanging edge banding (focus discussion)
Crash Mat Connector Laminate Pin Other Components: Sales Expenses, Designer Expenses, Store Costs, Factories Here I will perform a method to solve a cow, disassemble a set of cabinets into each individual item, and then analyze the details. With a five-metre long L-shaped cupboard containing three drawers as the cow I want to solve.
1, the box of the greasy
A, imported plates: 96 yuan / square meter (18 thick)
B, domestic plate: 45 yuan / square meter (E1 level)
C, domestic plate: 30 yuan / square meter (national standard)
The total amount of cabinet plate is 30M2, which is equivalent to the length of extension: A price is 576 yuan/mm
B price is 270 yuan / linear meter
C cost of 180 yuan / linear meter Therefore, this alone, if the domestic board instead of imported panels, manufacturers can obtain more than 1,000 yuan / sets of profits, if the use of 16MM thick sheet, the price will have to decline 10 yuan / delay Meter
2, the door of the cabinet door trick
A, imported love family board: 250 yuan / square
B. False Love Board: 130 Yuan/Square
C. Ordinary domestic color plate: 80 yuan/square cupboard door area is 6 square meters, A cost is 300 yuan/linear meter
B. The cost is 156 yuan/mm. Therefore, if the fake family board is used instead of the real family board, these doors can get a profit of 720 yuan. The difference between true and false love family board is that ordinary people can not see the difference. , Including non-cabinet industry remodeling people, this is where fenyun is asked to provide
3, hinge
A, imported hinges: 9 yuan / only (normal type)
B. Fake imported hinge: 4 yuan/only
C. Domestic Hinge: 1.2 yuan/only The amount of cabinet hinge is basically about 40, A price is 72 yuan/long meter
B cost at 32 yuan / linear meter
C costs at 9.6 yuan/mm. Therefore, if the imported hinge is replaced with a fake imported hinge, the manufacturer can make 200 yuan/set. If the domestic product is used, the profit is higher and true and false. How to identify: I don't know
4, Edge banding
A. Import: 9 yuan/meter
B, domestic: 2.5 yuan / meter This set of cabinets generally use about 70 meters, A cost of 126 yuan / linear meter
B, the cost of 35 yuan / linear meter Therefore, if the domestic instead of imported edge banding, manufacturers can make a net profit of 455 yuan / sets, and this is not seen by several consumers.
According to my understanding: Many brands of edgebands are fake ads. They are actually made in Germany. Actually, they are used domestically. The more inconspicuous, the easier it is to do fake.
5, baseboard
A, imported skirting: 90 yuan / meter
B. Domestic baseboard: 8 yuan/meter
5 meters of cabinets is 5 meters, then the A price is 90 yuan / linear meter
B's cost is 8 yuan/mm. Therefore, if domestic imports are used instead of imported ones, then the manufacturers can make a net profit of 410 yuan. Imagine that this is also the key point. After all, few people will see it.
6, adjust the foot
A. Import adjustment foot: 7 yuan/only
B. Domestic adjustment foot: 1.5 yuan / only the general amount of such cabinets in 32, then the A price is 44.8 yuan / linear meter
B. The cost is 9.6 yuan/mm. Therefore, if domestic imports are used instead of imported ones, the manufacturers can make a net profit of 176 yuan/set. The general consumers are not expected to pay attention to these researches. Therefore, we must take a look at the acceptance of the cabinets, especially to buy them. Small brand of cabinets
7, door handle
A, imported door handle: at least 50 yuan / only
B, Hong Kong door handle: 40 yuan / only
C, domestic door handle: 3~10 yuan/only (I calculate by 10 yuan/only)
The general amount is 20, then the A price is 200 yuan / linear meter
B cost is 160 yuan / linear meter
C cost 40 yuan / linear meter Therefore, if the manufacturers enough ruddy, using domestic handles instead of imported handles, you can make a net 800 yuan, how many people carefully handle the handle it?
The discovery of this problem was very accidental. I got a friend's allocation to me and asked me to see if there was any problem. The configuration was very good but the price was much lower than the 1696. It felt strange that we were Does fenyun lie? To know that 30 people had negotiated with him at the beginning, it was already killing the end price. Is there still a cupboard factory?
Then he called his friend and told him that everything written on the configuration was written into the procurement contract, and he stated that he had a penalty of one hundred. When the result was written in imported materials, the other person shook hands, and he refused to write it.
8, connectors
A, import connector: 5 yuan / only
B. Domestic connection: 1 yuan / only a set of cabinets in the amount of about 60, then the A price is 60 yuan / linear meter
B's cost is RMB 12/mm. Therefore, if domestic imports are used instead of imports, then manufacturers can make a net profit of RMB 240/set. This item is inside the cabinet. If you don’t pay attention, you can easily catch up.
9, hanging yards
A. Import hanging code 15 yuan/only
B. Domestic hanging yard 1.2 yuan / only a set of cabinets basically use about 15, then A cost is 45 yuan / linear meter
The B price is 3.6 yuan/mm. Therefore, if domestic imports are used instead of imports, the manufacturers can make a net profit of around 200 yuan.