Mach suspended ceiling installation

Renovation ceilings are indispensable, so when installing the owners must first know the entire installation process, to prevent some of the construction company's tricky. With the small series together below to see the detailed steps of the installation of the US-height ceiling.

Pre-installation inspection and preparation

According to the original auxiliary material details, the professional installers single-check the buckle board module, function module, expansion bolt, screw, keel crane, main keel, main keel connector, auxiliary keel, auxiliary keel connector, edge trim, etc. The model, specifications, quantity and length of various wires, the number of specifications.

Tool preparation

The professional installers are ready to install professional drills, hacksaws, files, grinders, screwdrivers, wrenches, rubber hammers and other professional installation tools.

Edge bar installation

According to the position of the mounting hole of the edge line, the first use of hunger drilling drill hole, the distance between the adjacent two holes should not exceed the width of the buckle plate module, nailed into the hole in the hole, and use a hacksaw to cut out the desired edge strip size and Angle, after finishing with a trowel, the trimming strips around the room are nailed with nails. For the four corners with a special shape with AB adhesive glue, install the edge strip should remain flat and should not attend the tilt phenomenon.

Acceptance of raw materials

According to the details of raw and auxiliary materials, the user can verify the carding, packaging integrity, instructions, and the number of installation accessories and the manufacturer's compliance, and verify the existence of defects and rust on the surface of the module and the accessories.

Installation condition verification

Before the formal installation, the professional installers should check that the installation conditions are in accordance with the contents of the installation notice. Under the premise of full compliance, the integrated multi-functional ceiling module can be installed.

Power wiring

According to the wiring requirements specified in this standard, and according to the requirements of the specification, the power supply and the product should be properly connected, the wires of the switch should be controlled, and the requirements of the installation manual should be completed to carry out trial operation of the various functional modules.

Screw hanger installation

1. Shearing screw and pre-installed expansion screw and screw hanger

2. Screw installation

3. Cut the keel and pre-install the triangle hanging piece

4. Arrangement of keel structure

Functional module installation

Install the function module on the auxiliary keel according to the installation method in the instruction manual to ensure that the functional module is firmly installed.

Hidden project inspection

The professional installer shall check the installation position, prevent the looseness of the components and functional modules of the electrical safety (wiring) screw hanger, and inform and assist the user to verify the corresponding items of the user acceptance guide.

Buckle module installation and adjustment

1. Buckle module installation

2. Adjustment of the daughterboard module

3. Cleaning

final test

After the installation is completed, the installer will inspect the electrical safety (leakage) pinch plate module against looseness, installation dimensions, surface quality, and noise items, and inform and assist the user to verify the corresponding items in the user acceptance guide.

Information on the installation of Mach suspended ceiling was introduced here for everyone. I hope this article will help you. If you still have something that you don't understand, you can leave a message for Xiaobian at the bottom. We will answer you as soon as possible.

The most practical interior ceiling decoration tips

Aluminum ceiling kitchen and aluminum alloy ceiling uneven how to do

Integrated Ceilings Introduction to Osram Integrated Ceilings

What should be paid attention to in Meierke ceiling decoration?

Suspended ceiling design ceiling installation kitchen ceiling

Disperse Printing Dyes include Disperse Yellow 114, Disperse Yellow 126, disperse yellow H/3GRL, Disperse Red 343, Disperse Cyanine Blue B, Disperse Blue 60:1 etc.

The dyeing appropriate pH value of disperse yellow 114 is for 3 ~ 7, suitable for high temperature high pressure dyeing method and thermosol dyeing method, is not suitable for carrier dyeing and thermosol dyeing appropriate temperature for 2 1 0 ~ 2 2 0 ℃, used for direct printing vinegar fiber fabric and polyester/cotton blended fabric dyeing hot melt.

Disperse Printing Dyes

Disperse Printing Dyes,Disperse Yellow 114,Disperse Red 343,Disperse Cyanine Blue B

TAIZHOU YOUSHENG CHEMICAL CO., LTD , https://www.youshengchem.com