How to install the bathroom cabinet bathroom cabinet material which

Nowadays, the importance of bathroom cabinets in the bathroom is becoming more and more obvious. Many people begin to think that many bathroom accessories will appear messy in the bathroom. There is a bathroom cabinet, so you can put many unusual items in the bathroom cabinet. The whole bathroom looks neat and refreshing. The following small series describes how to install the bathroom cabinet and bathroom cabinet materials.

How to install the bathroom cabinet

1, before installation, check whether the spare parts are complete.

2. Install the delta valve to ensure that the hot and cold inlet pipes remain flush.

3, measuring distance, install the water pipe. Apply glue evenly to ensure tight tube-to-tube connections.

4. Install cabinet corners to see if all corners are at the same level. After installation, make appropriate adjustments.

5. Put the bathroom cabinet against the wall. Look at the location of the outlet pipe. If it is not appropriate, make some changes.

6, install the basin faucet. It is advisable that the faucet be purchased with the bathroom cabinet so that the outlet angle is suitable.

7. Fix the basin faucet with a nut. One hand should hold the faucet when fixing, so as to avoid position deviation after being installed.

8. Place the washbasin with the faucet on the bathroom cabinet and adjust the position to the best.

9. Connect the water inlet and outlet pipes of the basin and the water. The length is appropriate and the position is reasonable.

10. Install the handle of the cabinet and make appropriate adjustments.

11. The method of connecting the basin and the ceramic tile is fixed with silica gel so as to achieve the purpose of the cabinet body being firm and preventing leakage.

12. Turn on the tap to test the water discharge to see whether the leading angle is appropriate and whether the water flow is smooth or not.

13. Clean the cabinet after testing.

What is the material of the bathroom cabinet

1, particle board

Most commonly used for some inexpensive computer desks and furniture and kitchen utensils, low cost, processed from wood processing waste, high water absorption, from the opening and the interface, the edge of the plate can be identified. Manufacturers often use simulation paper, veneer, plastic skin, edge edge wrapping with other materials, and then processed by colored paint. Bad manufacturers and distributors are often based on their real appearance effect, according to the buyers do not understand the raw materials, such products to act as solid wood products.

2. Blockboard

More common in some low-cost or high-priced wooden furniture, because it is made of solid wood splicing, but also divided into different types of wood, the price is therefore different, the pressure resistance due to different types of wood and the production process is very different, if The paint on the surface is not done well, and both the sun exposure and the humidity will crack.

3, MDF

More common in some ordinary computer stations and office furniture, home furniture, used for indoor exhibition booth decoration, waterproof moisture is not ideal. Easy to expand and crack, can not be used in the bathroom more humid environment. However, some unscrupulous manufacturers and distributors often use MDF-laminated MDF products to impersonate consumers with solid wood.

4, moisture-proof board

Although the board has a certain moisture resistance, there are also some manufacturers of melamine finishes, but the board has added a lot of moisture-proof glue inside the board, the formaldehyde content is seriously exceeded, and does not belong to environmental protection building materials products.

5, oak board

Oak has a unique wood grain, heartwood corrosion resistance, high density, hard texture, is a hardwood class. Home furnishings made of oak have the advantages of dignified and noble elegance of mahogany furniture. However, the price is much lower than that of mahogany. Due to the numerous advantages of oak, this material is widely used to produce beer barrels, wine barrels, bathroom barrels, floors, and outdoor wooden bridges. It is the best material for making bathroom cabinets. According to the color of oak, it can be divided into two kinds: white oak and red oak. China's output is extremely rare and it is generally imported in the United States, Malaysia and Thailand.

6, stainless steel plate

The use of high-quality stainless steel plate and other materials refined through several processes, diverse styles, unique design, environmental protection, moisture, mold, rust, waterproof, will not produce any harmful substances, beautiful and durable, and stainless steel plate can also be recycled . The common plate has 202#, 304#, 201# and other specifications.

7, red board

"Redwood" is a collective name for rare hardwoods. It refers to the redwood species specified in the national standard, such as: rosewood, chicken wing wood, rosewood, rosewood, etc., all imported.

Editor's summary: The materials on how to install the bathroom cabinets and bathroom cabinets are introduced here, and we hope to help everyone. If you want to know more about yourself, you can follow the information on this site.

Bathroom Cabinets Bathroom Cabinets How to Install Bathroom Cabinets

Aluminum Alloy Extrusion Profile Y Tube 

YF offers A6061,A6063 and other series aluminum alloy extrusion profile Y tubes for printer and copier. The extrusion Aluminum Tubing can be shaped in almost any way desired. This provides unique construction and design possibilities, which is a good foundation for creating products that contribute to sustainable development.

1.Application: For printer and copier

2.Material: A6063, A6061, A3003 and other series alu alloy        

3.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
4.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine  

OD

OD Tolerance

ID

Tolerance

Roundness

Straightness

Circular  

 run-out

φ16-20

±0.02

±0.02

0.01↓

0.015↓

0.05↓

φ20-30

±0.02

±0.02

0.01↓

0.015↓

0.05↓

φ30-50

±0.05

±0.05

0.02↓

0.020↓

0.08↓

φ50-80

±0.15

±0.10

0.05↓

0.025↓

0.10↓

5. STANDARD PACKING:Wooden case/carton

6. Trade Terms

1) Payment: 30% T/T in advance, 70% balance pay before delivery.  L/C at sight.
2) Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3) Trade Term can be chosen depending on your requirements.
4) FOB Port: Shanghai


Alumunim Tube Workshop

Extrusion Profile Y Tube

Extrusion Profile Y Tube,Aluminum Extrusions,Extrusion Aluminum Pipe Tube,Aluminium Profile Tube

Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com