The house was completely renovated, but it was found that many electrical appliances could not be installed because they did not have enough power for the circuit or had enough space reserved before the renovation. In order to avoid such problems, what should you pay attention to before installing a home appliance? Please ask a professional to give you a reminder. >>> Links: Four principles for choosing healthy kitchen appliances Microwave oven fridge is ready to reserve a separate line for decoration <br> Refrigerator, microwave oven input power is larger, which requires its power cord must be used alone, so as to avoid the use of other electrical appliances and the occurrence of tripping, power failure. Separate lines should be reserved before refitting the kitchen. At the same time, the placement of the pipeline should be kept away from the gas stove to avoid contact between the pipeline and the heat source. In addition, although the microwave oven does not have to be fixed to the wall like a water heater, it is better to fix the position of the microwave oven in consideration of safety. Do not place the microwave oven. The installation of the electromagnetic oven is the same principle. Air conditioning decoration before painting ready to paint the air conditioning hole <br> Before painting the walls to set the air conditioning brand, model, let the air conditioning installation personnel first drill the air conditioning hole, while the indoor machine hooks are installed, so will not Affect the decoration effect. The location of the outlet must also be determined in advance, preferably near the air conditioning, and it is a separate outlet that is used separately from other appliances. Sound decoration before paving the floor The washing machine is ready to set aside for drainage and water passages. <br><br><br><br> If the developer has already established a drainage channel, these do not need to be considered. Otherwise, the holes should be laid in advance during the renovation. At the same time, the power supply of the socket should be installed in a dry place. If the washing machine is to be placed in the bathroom, the power of the washing machine should be 1.2 meters away from the ground. The location of the power supply before the renovation should be determined. Yuba renovated and ready to go when the ventilation pipe before installing the Yuba <br> to take into account the ventilation tube and go, Yuba not too close to the house from the top. In order to keep the power supply away from the water and avoid danger, the height of the Yuba should not be too close to the ground. Generally, the distance between the Yuba and the roof is between 15 cm and 20 cm. Renovation starts to prepare the entrance decoration children's room decoration microwave socket electrical home interior decoration decoration kitchen decoration living room
Whether you don’t want a stereo or not, it’s best to lay the line in front of the living room. The AV, video, and speaker cables must be given their respective positions in advance. Once you forget about cabling, you will buy stereos in the future. The various types of lines you connect can only go on the ground, affecting your appearance.