Luannan Police Tips: How to escape from a car accident

In addition to the constant emphasis on how safe and robust the vehicles they manufacture are, the current car dealers are quite lacking in the correct use of the safety equipment for drivers or passengers; but for the safety of people while driving This is a very important part, and the correct use of the safety equipment given by the vehicle is the only way to protect life!

The first is the method of using the seat belt. Take the three-point seat belt attached to a general vehicle as an example. While wearing the seat belt, the back and waist of the human body should be as close as possible to the seat, and the brake can be Step on the accelerator pedal to the end (the turbulent car has a clutch pedal), and ensure that the knee is slightly bent to avoid serious secondary injuries to the leg when the vehicle is subjected to a frontal collision.

The lower part of the seat belt should be located in the hips to avoid the impact of the vehicle, the internal organs of the human abdominal cavity will be squeezed by the seat belt and irreparable injury will occur; the upper part of the seat belt should be placed in the center of the shoulder and neck , Roughly the collarbone part, if it is too close to the outside of the shoulder, the vehicle will easily fall off from the outside when the vehicle is automatically tightened by the impact seat belt. This part of the adjustment depends on the seat belt height adjustment mechanism on the B pillar of the vehicle. .

The next thing is the correct concept of escape when you roll over. Do n’t say that the author touches your eyebrows, just like insurance. No one can ensure that there will be no accidents in a lifetime, so it is absolutely necessary to have a correct concept of escape If the vehicle has a rollover accident, the first thing the driver needs to do is to turn off the vehicle to prevent the vehicle from burning or exploding.

After the flame is turned off, the passengers in the car must first support the roof with both hands, lift their feet and firmly press the instrument panel or the center console, and support the body firmly in the seat to facilitate the removal of the seat belt; and After using one hand to unfasten the seat belt, close the seat belt as far as possible to avoid the obstruction of the next escape action by the seat belt; and if there is a seat in the front passenger seat at this time, let the first passenger from The door on his side escaped from the cabin, and the driver should retract his feet and continue to support the roof with his hands until the driver squatted down in front of the co-pilot before releasing his hands. It is recommended that the driver escape from the direction of the front passenger seat, mainly to avoid the steering wheel from affecting the driver's escape action.

If the door cannot be opened, sharp objects should be used to knock on the upper corner of the window glass, causing the window glass to crack and start to escape; before escaping the vehicle, also pay attention to the road conditions outside the vehicle to avoid recurrence A second accident occurred.

If the vehicle falls into the water unfortunately, it is important to remember that because the weight of the engine room is heavy, if the vehicle is front-mounted, the passengers in the vehicle must escape from the rear, because the heavier part of the vehicle will first get off Shen, in order to get more time to escape, personnel must first escape from the place where it sinks slowly. If the vehicle is equipped with a rear engine, follow the same reason to escape from the front door of the vehicle.

Titanium Zinc Composite Panel

Composite Cladding Panels,Titanium Zinc Composite Sheet,Titanium Composite Panel,Titanium Zinc Composite Panel

zhejiang kangzhan new materials co.,ltd , https://www.mcbondacp.com