Good taste with appreciation space doubles the value of beech furniture collection

In recent years, both consumers and collectors have pursued mahogany furniture , making the price of mahogany furniture rising steadily, and even selling three pieces of mahogany furniture at a high price of 5.8 million. However, in addition to mahogany, there are many popular furniture, such as beech, which also has high potential value.

Good taste has room for appreciation

Antique furniture investment in the past few years the collection industry has become a fashion, but as the essence of Chinese classical furniture of Ming and Qing Dynasties antique furniture naturally become collectors trying to find the treasure. According to reporters, Ming and Qing furniture is mainly composed of "Yihuang" (Huanghuali), "Two Blacks" (Pterocarpus), "Three Reds" (Old Redwood, Chicken Wing Wood, Tieli Wood) , and "Four Whites" (Nanmu, beech, oak wood needles), etc. produced.

Some experts pointed out that in the case of high prices in various traditional collections, such as Chinese paintings and calligraphy, ceramics, antiques, etc., there is still a huge gap between the Ming and Qing furniture prices and the international market prices, and there is a lot of room for appreciation in the future. It should be a promising investment project. Someone estimated that the annual appreciation rate of Ming and Qing furniture is about 20%, which shows that the collection of Ming and Qing furniture does have great appreciation potential. Collecting Ming and Qing furniture is a promising value-preserving investment behavior.

Although beech furniture is not as glamorous as Huanghuali furniture, and it is not as precious as red sandalwood furniture, it has always shown a broad and elegant taste in the history of ancient Chinese furniture. From the perspective of historical and economic value, the value of good beech furniture is not inferior to that of some hardwood furniture. In the past five years, the price of beech furniture has doubled. And there is still much room for appreciation.

Double the collection value

Mr. Li has been fond of collecting for more than 10 years. A year ago, he saw an old beech cabinet in the Ming and Qing dynasties from an old collector. Not only is the workmanship fine and well preserved, but also there are exquisite carvings on it, so Li Mr. bought it for 10,000 yuan. "At that time, I thought it was good-looking and could be placed in a collection of porcelain. I did not expect it to appreciate now. It has risen to 20,000 and the price has doubled." Although the furniture is not a piece of luxurious wood furniture, it occupies a high position in the classic furniture of the Ming and Qing dynasties handed down, so it has a high collection value.

Ming and Qing furniture identification

     It can be judged from the decorative methods such as material selection, line foot, carving, inlay and so on. Ming made a lot of hardwood into furniture, which is more

It uses its beautiful patterns. In many furniture treasures, you can see that the best materials are usually used in the most prominent parts of the furniture.

For example: face-centered panels, door panels, drawer face and
back plate against the other parts of the United States are used to obtain decorative effects timber.

  
Classical furniture uses raw lacquer and hot wax. It is better to use 95% beeswax with wax, and then polish the wax to make the surface of the furniture bright and clean

Clean, smooth corners. The carving process is excellent, creative, and the stone has an abstract style, the lines are elegant, the drying is full, not afraid

crack. Modern imitation furniture of Ming and Qing Dynasties is replaced by paint, with saw marks on the interface, mass production, new stones, complicated lines, and easy to crack

Shaped, glued with nails and glue. The ancient furniture in the Ming and Qing Dynasties was very heavy, while the new furniture was lighter, so just move it to know

dawn.

Advantages and benefits
Easy installation and low maintenance cost of heat pipes and Vacuum Tubes,

High-quality stainless steel for the inner tank to continuously maintain a good water quality.

Stable operating without tube scaling or pipe explosion risk.

Fast system starting, high energy yield and low heat loss.

Strong capability of anti-freezing that is available for applications in low temperature area.

Pressurized system operating which is suitable for different installation methods.

The selective coating on the inner cover of the vacuum tubes converts solar energy and transfers heat to the heat pipes by aluminum fins. The liquid in the heat pipe changes into vapor which rises to the condenser. Then the heat passes through the heat exchanger, the water inside of water tank is being heated, and the vapor becomes liquid, returning to the bottom of the heat pipe. This transference of heat creates a continuous circulation as long as the heat pipe vacuum tube collector is heated by sun.

 

Heat is transferred by liquid to the water tank and heat the water efficiently. In addition, heat pipe vacuum tubes is highly freezing resistance, which ensures higher efficiency in cold areas.

 

Pressurized water tank ensures high comfort when customer uses hot water, the water flow and water pressure is much higher than compact non-pressurized solar water heater.

Pressurized Solar Water Heater

Pressurized Solar Water Heater,Pressurised Water Heater,Compact Pressure Solar Water Heater,Pressurized Home Solar Water Heater

Linuo Ritter International Co.,Ltd , https://www.lnrtsolarenergy.com