Exposed Bath And Shower Faucets Exposed Bath And Shower Faucets,Single Handle Bath Shower Faucet,Wall Mounted Brass Shower Faucet,Single Handle Bath & Shower Faucets Kaiping Jenor Sanitary Ware Co., Ltd , https://www.kpjenorsanitary.com
After the use of explosion-proof tools in our daily work, there should be a proper maintenance phase, which is crucial to the life of the tool, because if the maintenance of explosion-proof tools is not appropriate, our tools cannot be used for a long time. We serve. First of all, we need to keep the tool in a dry place. This is to make sure that some parts of the work do not get damaged.
After 20 consecutive taps in our daily work, the surface attachments of the tool should be treated, and then used after being cleaned. Do not use it continuously so as to prevent the tool from being heated due to prolonged friction. May damage our tool products.
2. After use, clean the surface of dirt and deposits and store it in a dry, safe place.
3, percussion tool products, can not be a continuous blow, more than 10 times should have an appropriate interval, at the same time to promptly remove the sticky debris in the product site and then continue to use.
4, wrench products can not be overpowered, but can not use the casing or tied to other metal rods and long arm, and the use of hammer hammer (except tap wrenches) method knob fasteners used.
5, edge tool should be placed in the sink and gently grind the grinding wheel, not too much force and contact with the grinding wheel for too long.
6. In the actual operation of hammering tools, it is necessary to remove the oxides on the surface of the debris and the working surface to prevent third parties from hitting.
Based on the above performance and use, it is shown that aluminum-copper alloys are more suitable for normal pressure equipment and environments where explosion-proof conditions are not strict (such as gas stations, small oil depots, etc.) during normal use. The applicability of the performance of beryllium copper alloy explosion-proof tools (such as oil refineries, gas conversion stations, gas recovery plants, drilling teams, etc.).
7. Before the various products are used, the surface oil shall be removed. Use the steel tool with reference to the instructions.
Explosion-proof tool maintenance method
1. Explosion-proof tools have brought safety protection to our work personnel in flammable, explosive and corrosive workplaces. This has made our social security more complete and our staff more comfortable.