A small method for cracking paint surface-furniture maintenance

The furniture industry we bought not long ago will have cracks in the paint surface, which is really confusing. What is the reason? If there is cracking and it is really unsightly, how to remedy it? Today, Xiaobian brings expert remedies.

Experts tell you how to remedy cracks in furniture paint

The remedies vary depending on the "paint": after a winter of warm and dry, it is normal for the furniture paint surface to crack or even crack. If the furniture has cracked paint surface, you need to do remedial work. According to the different lacquer surface, the remedies adopted are also different.

Woodworking paint is divided into clear oil and mixed oil, of which clear oil is divided into ordinary paint and water-based paint, and the treatment methods are different.

Experts tell you how to remedy cracks in furniture paint

A. Clear oil

Ordinary paint: Add water with fine sandpaper with more than 800 mesh, carefully polish the cracks, clean the polished place, then brush the same color paint, and then dry it again.

Water-based paint: Use special repair wax and apply it carefully.

Experts tell you how to remedy cracks in furniture paint

B. Mixed oil

1. If the paint surface has been severely cracked, the cracked paint surface needs to be carefully removed, coated with putty, polished and sprayed.

2. If only a slight crack appears on the paint surface, directly polish it, then spray paint.


Construction stage: to prevent furniture from cracking.

Experts tell you how to remedy cracks in furniture paint

1. After finishing the carpentry work, it must be placed for a few days, and then paint after the water has evaporated, so as to prevent the paint surface from being cracked due to the deformation of the furniture due to excessive moisture in the wood.

2. When painting, be careful not to make the paint surface too thick. The thicker the paint surface, the easier it is to cause the paint surface to crack due to the unevenness of the surface layer and the inner layer.

Experts tell you how to remedy cracks in furniture paint

3. When making the door cover of the bathroom, anti-corrosion and waterproof treatment should be done on the back.

4. When making doors, don't cling to the ground, generally need to leave a certain distance

In this way, the door can be prevented from clinging to the ground after the floor is laid, and absorbing moisture from the ground.

PP Flame Retardant Sheets

Twin Wall Polypropylene Sheet,Blue Polypropylene Sheet,Coloured Polypropylene Sheet,Transparent Polypropylene Sheet

Heshan Liantuo Engineering Plastic Co.,Ltd , https://www.liantuoplastic.com